Audi 80 Battery, Starter and Alternator Current Flow Diagram

Below here is the current flow diagram on Audi 80 battery, starter and alternator.

Wiring colors:

bl = blue

br = brown

ge = yellow 

gn = green

gr = grey

li = purple

ro = red

sw = black

ws = white

A     -  Battery
B     -  Starter
C     -  Alternator
C1    -  Voltage regulator
D     -  Ignition/starter  switch
T 1s  -  Connector single, red, behind dash panel, left
T 2ab -  Connector 2 pin, grey, near starter
T 10  -  Connector 10 pin, black, connector point in aux. relay carrier
T 10a -  Connector 10 pin, yellow, connector point in aux. relay carrier
6   - Earthing  strap, engine - alternator
11 -  Earth point, in battery box
A17 -  Connection  (61), in dash panel wiring loom

Audi A4-S4 B5 Mirrors Housing Replacing Instruction

Yesterday I've posted about how to removing and installing the bass loudspeaker, now I want to show you about how to replacing the mirror housing on Audi A4-S4 B5 series without removing mirror completely  

Please read the instruction and the diagram below carefully.

• Remove mirror glass.
• Remove screws -4- (2x).
• Press back retainers -2- then take off cover -3- downward.
• Remove screws -1- at mirror adjusting unit.
• Lift up housing -5- and remove.

Removing and Installing The Bass Loudspeaker R100 on Audi A4 Avant 2002-2004

How to Removing:

• Open cover in side trim on right rear side of luggage compartment. 
• Disconnect electrical connections -1- and -2-.
• Unscrew bolts -arrows-. 
• Remove bass loudspeaker -3- together with amplifier -4-

Installing:

• Install in reverse order of removal.
• Tighten bolts on loudspeaker to 2 Nm

Welcome To Simplefoo..

Greetings to you all.. welcome to my blog..
This is my first time to write on blog.. please stay close, I will try to find many interesting things to write about.. :)